How to Compress a Photo Without Losing Visible Quality
A photo straight from a phone camera is often several megabytes. That is more than an upload form, an email or a web page needs. You can usually make it many times smaller without anyone seeing a difference, as long as you change the right things in the right order.
The two things that make a photo large
Pixel size. A 12 megapixel photo is about 4,000 × 3,000 pixels. Most screens show far fewer than that. Halving the width and the height leaves only a quarter of the pixels: 2,000 × 1,500 is 3 megapixels, which is still sharp on a laptop or phone screen.
Compression quality. JPG and WebP files throw away detail the eye is unlikely to notice. The quality setting, from 1 to 100, decides how much. Between 75 and 85, most photos look the same as the original on a screen but take far less space.
Resizing usually saves the most, so do it first.
Step 1: Resize to the size you actually need
Open the image resizer, choose your photo and set the largest width and height you need. Choose "Fit within dimensions" so the photo keeps its shape. Useful sizes:
- Website images: 1,200 to 2,000 pixels wide for a full-width picture, less for a picture beside text.
- Email and messaging: about 1,600 pixels on the long side is plenty for viewing on a screen.
- Profile photos and forms: check the size the site asks for. Many need only a few hundred pixels.
If only part of the photo matters, crop it first with the image cropper. Fewer pixels means a smaller file.
Step 2: Compress with the right quality and format
Open the image compressor, choose the resized photo and pick:
- Quality: start at 75. If you can see blotches or blurred edges, try 85.
- Format: WebP is often smaller than JPG at the same look, and every current browser shows it. Choose JPG when the photo is going somewhere that may not accept WebP, such as an older upload form or an email to someone using older software.
The compressor shows the size before and after, so you can try two settings and keep the smaller one that still looks right.
Worked example
Say a form only accepts photos under 200 KB and your photo is a 4,000 × 3,000 JPG of a few megabytes. Resize it to 1,200 × 900 pixels, then compress it as JPG at quality 75. At that size and quality, a typical photo comes out at roughly 100 to 250 KB, depending on how much fine detail it has. If it is still over 200 KB, lower the quality to 65 or the width to 1,000 pixels and try again.
What not to do
Do not compress the same JPG again and again. Each lossy save throws a little more detail away, and the damage adds up. Always start again from the original.
Do not save photos as PNG to keep them small. PNG is lossless, so a photo saved as PNG is usually much larger than the same photo as JPG. If you have a photo in PNG, convert it with the PNG to JPG converter.
Do not expect a perfect file to shrink. If a photo has already been compressed well, compressing it again may save little or even make it slightly bigger.
Photos from an iPhone
iPhones save photos as HEIC by default, which is already efficient but is not accepted everywhere. Convert them with the HEIC converter, or set the camera to save JPG in Settings, then Camera, then Formats, and choose Most Compatible.
Is it safe to compress photos online?
The tools on this site read your photo on your own device and do not upload it. Re-saving a photo through the compressor also leaves out most of its hidden data, such as the camera details and, on many phones, the GPS location where it was taken.
Questions and answers
How can I compress a photo without losing quality?
Resize it to the size you need, then save it as JPG or WebP at quality 75 to 85. Some detail is always removed by lossy compression, but at those settings it is very hard to see on a screen.
How do I make a photo smaller than 100 KB?
Resize it to about 800 to 1,000 pixels on the long side, then compress it at quality 60 to 75. Check the size the compressor reports and adjust one setting at a time.
Should I use JPG or WebP?
WebP is often smaller at the same look and works in every current browser. Use JPG when you are not sure the place you upload to accepts WebP.